Upgraded Kobra S1/Kobra 4/Kobra X Build Plate Geco Plate,264x276MM PLA Cold Printing Plate (No Heating) Energy Saving Room Temperature Printing Spring Steel Hot Bed for Anycubic Kobra S1 Combo/KX - size: 264x276mm (for Kobra s1)

About this item

• Compatible printer:It is suitable for Anycubic Kobra X/Kobra 4/kobra s1/Kobra s1 Combo/Kobra s1 ACE Pro 3D Printer.GECO plate has a beautiful surface texture and a full sci-fi style.The print will not transfer the surface texture,which can keep the bottom ofyour print delicate and uniform with coordinated texture.
• No Heat Required:​Specially manufactured for PLA,no need to wait for heating up the hot bed.Just set the printing plate to 1°C,with less power,it can save you more energy and reduce printing costs.(Attention:If you printer can't set to 1°C,please updade your firmware)The GECO Plate is also the first choice for farmers to print,stable printing, energy saving and reduce spaghetti.Note:Only PLA can be printed.
• Thicker and heavier:Our GECO is thicker and heavier than ordinary PEI hot beds. Thick and magnetic, it can prevent large prints from warping and small and tall prints from falling over. Flexible, detachable, double-sided design. Durable and easy to use, place the print plate on the hot bed of the Anycubic Kobra X/Kobra 4/Kobra S1/Kobra S1 Combo FDM 3d printer, and then the print bed will automatically level when it is turned on. The spring steel plate can be bent, and the model can be quickly removed without the help of other tools. And the board will flatten again.
• Maintain Build Plate:After long-term repeated use, the plate needs to be repaired and cleaned(Before printing, you can clean the GECO plate by wiping it with alcohol or using soapy water to remove dust, oil, and fingerprints). Maintain the print platform: After long-term repeated use, the print build plate needs maintenance and cleaning. After cleaning, set the hot bed to 55℃ to heat the build plate, which will restore the adhesion of the build plate to its original state. (No printing is required during the maintenance process)
• Reusable,Perfect Adhesion:It has excellent adhesion without heating the platform,The model can be firmly attached to the GECO surface,Even beginners can print easily.Long term printing can still maintain 100% perfect adhesion,say goodbye to glue and spray, make every printing process smooth and effortless.
• Stable endurance, long-term use:GECO stabilizing coating is very durable and maintains stable adhesion evenafter long-term use. lt extends the service life of the printing plate and reducesthe cost of 3D printing.which is more low-carbon and environmentally friendly.After 400+ prints, the adhesion of the GECO printing plate is still about 80%.
• Note:Our "no heating" is the result of testing at room temperature of about 20℃. If your room temperature is very low, please increase the temperature to 20-40℃. If the object you print is a batch of mini object or a large object, it is recommended to add a brim or increase the temperature.