1 6

Upgraded Creator 5/5 Pro Smooth PEI Build Plate - size: 266x293mm

Upgraded Creator 5/5 Pro Smooth PEI Build Plate - size: 266x293mm

$41.48 USD
$41.48 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.

About this item

  • 1.【 One plate, two surfaces – mature engineering for all filaments】：a.Gold spray side-- Proprietary PEI powder coating (stronger adhesion, finer texture), stainless steel core (faster heating, higher flex resistance). Supports PLA, PETG, ABS, TPU, PC, nylon – up to 300°C. b.Black PEI film side-- 100% imported PEI film with upgraded 3M adhesive (no bubbling, no lifting). Smooth flat finish, mirror-like bottom for PLA/PETG. One plate, two surfaces – mature and reliable.
  • 2.【 Gold spray side – market-proven, beginner-friendly, great value】： Market-proven for years – stable, easy to use. Our proprietary PEI powder delivers far stronger adhesion than ordinary sprays – even beginners succeed easily. PLA can be printed at 50-55°C (vs 60-70°C), PETG 5-10°C lower – save energy, reduce warping. Supports high-temp engineering filaments like ABS, TPU, PC, nylon. Easy cleaning – use alcohol or mild dish soap, won't damage coating. One plate replaces multiple plates – unbeatable value
  • 3.【 Black PEI film side – upgraded 3M adhesive + imported film, bubble-free】： Ordinary PEI film often suffers from bubbling, lifting, scratches. We use 100% imported PEI film + upgraded 3M adhesive – completely bubble-free, perfectly flat. Prints PLA (55-70°C), PETG (≤70°C) with a smooth, glossy bottom – no orange peel, no sanding. Removal: cool → bend → pop, plastic scraper allowed. Alcohol-safe, easy clean. Peel off protective film before first use.
  • 4.【 Stainless steel core + high‑temp filament printing guide】： We use stainless steel (not cheap manganese/spring steel) – uniform heating, faster warm‑up, higher flex resistance, long‑term flatness. 0.5mm balances rigidity and flexibility.⚠️ For ABS / TPU / PC / nylon:1.Add brim/raft to increase contact area;2.Slow first layer speed (e.g., 10‑15 mm/s);3.Use glue stick if needed (water‑soluble);4.Keep ABS at 70‑90°C (do not lower),Follow these tips for stable, warp‑free results.
  • 5.【 Fits Creator 5/5 Pro & how to use】：Size: 266x293mm – perfect fit for Creator 5/5 Pro.Steps: ① Place plate on heated bed. ② Select correct mode (High‑Temp/Textured PEI for gold side; Smooth PEI for black side). ③ Level bed – nozzle at one A4 paper thickness (too low = permanent scratch). ④ Set temperature accordingly (gold side up to 300°C, black side ≤70°C). ⑤ Print → Cool → Bend → Pop. ⑥ Clean either side with 70%+ alcohol or mild dish soap, dry.[Bottom line]: Mature product, self‑developed core, solid materials, beginner‑friendly, great value. Upgrade your printing today.

Low stock: 10 left

View full details

Reviews

  • ⭐⭐⭐⭐⭐

    Hannah Miller — Seattle, Washington
    I ordered several science activity supplies for projects at home. The product descriptions made it easier to compare the available options, and everything fit neatly into our learning space. Stemora made finding tools for hands-on activities feel simple and organized.

  • ⭐⭐⭐⭐⭐

    Daniel Foster — Austin, Texas
    I found a useful selection of electronics and robotics accessories for a beginner project. It was convenient to browse related components in clearly organized categories. I would consider shopping here again when planning another maker activity.

  • ⭐⭐⭐⭐⭐

    Lauren Bennett — Denver, Colorado
    The measurement and observation tools I selected worked well for the classroom activities I had planned. I especially appreciated being able to review the product details before ordering and choose items that matched the lesson requirements.

  • ⭐⭐⭐⭐⭐

    Jason Parker — Portland, Oregon
    I purchased a few storage items and small tools for organizing my maker workspace. The products helped keep components, wires, and project materials easier to sort and access. The overall shopping experience was straightforward and convenient.

New Arrivals

View all

FAQ

What types of products does Stemora offer?


Stemora offers supplies for science experiments, microscopy, biology learning, measurement, laboratory organization, electronics, robotics, coding education, 3D printing, maker projects, and classroom activities. Available products and specifications may change over time.

Are Stemora products suitable for children?


Recommended ages vary by product. Please review the product description, manufacturer guidance, included warnings, and required skill level before purchasing. Products containing small parts, tools, electrical components, glass, or chemicals may not be suitable for young children.

Is adult supervision required?


Adult supervision is recommended for children and students, especially when using electrical components, sharp tools, heated equipment, glassware, small parts, or experiment materials. Customers are responsible for following all product instructions and safety precautions.

Can these products be used at home and in classrooms?


Many products may be suitable for classrooms, home learning, science projects, maker spaces, and hobby activities. Suitability depends on the specific product, learning environment, user experience, and intended activity.

How can I check what is included with a product?


Please review the product title, description, specifications, images, package quantity, and included-components section before ordering. Items shown for demonstration or scale in product images may not always be included.

How do I know whether an electronic or robotics part is compatible?


Check the listed dimensions, voltage, connector type, board compatibility, operating requirements, and supported platforms. Compatibility is not guaranteed unless it is specifically stated on the product page. Contact us before ordering if you need clarification.

When will I receive tracking information?


Tracking information is generally provided within 3–5 business days after an order is confirmed. In some cases, processing may take approximately 7–8 business days. Delivery may require an additional 4–5 business days after tracking becomes available, depending on the carrier and destination.

Why did my order arrive in separate packages?


Products in the same order may be shipped from different fulfillment locations. As a result, items may arrive separately and have different tracking numbers. You will not be charged additional shipping fees solely because an order is divided into multiple packages.

Can I change or cancel my order?


Contact us as soon as possible at vaioamaonaoak@gmail.com. We will try to assist, but changes or cancellations cannot be guaranteed once an order has entered processing or has been shipped.

What should I do if an item arrives damaged, defective, or incorrect?


Contact us promptly at vaioamaonaoak@gmail.com with your order number, a description of the issue, and clear photographs of the item, packaging, and shipping label. Please retain the product and original packaging while we review your request. Eligibility and available resolutions are subject to our Return & Refund Policy.

Blog posts

View all
  • How to Organize Resistors, LEDs, and Tiny Components in a STEM Classroom: A Step-by-Step Guide

    How to Organize Resistors, LEDs, and Tiny Compo...

    Discover how to organize resistors, LEDs, jumper wires, and other small electronics components in a STEM classroom. This practical guide covers storage solutions, labeling systems, project kits, and inventory routines...

    How to Organize Resistors, LEDs, and Tiny Compo...

    Discover how to organize resistors, LEDs, jumper wires, and other small electronics components in a STEM classroom. This practical guide covers storage solutions, labeling systems, project kits, and inventory routines...

  • Arduino Wiring Errors: 7 Mistakes Beginners Make and How to Fix Them

    Arduino Wiring Errors: 7 Mistakes Beginners Mak...

    Troubleshooting Arduino wiring errors becomes easier when you know where to look first. Learn how to identify common breadboard, power, polarity, grounding, and pin-assignment mistakes in beginner electronics projects

    Arduino Wiring Errors: 7 Mistakes Beginners Mak...

    Troubleshooting Arduino wiring errors becomes easier when you know where to look first. Learn how to identify common breadboard, power, polarity, grounding, and pin-assignment mistakes in beginner electronics projects

  • The Beginner’s Wiring Mistakes That Can Quietly Break an Arduino Project

    The Beginner’s Wiring Mistakes That Can Quietly...

    Learn how to troubleshoot common Arduino wiring errors in beginner electronics projects. Discover practical breadboard, LED, sensor, power, and grounding checks that make STEM maker projects easier to debug.

    The Beginner’s Wiring Mistakes That Can Quietly...

    Learn how to troubleshoot common Arduino wiring errors in beginner electronics projects. Discover practical breadboard, LED, sensor, power, and grounding checks that make STEM maker projects easier to debug.

1 3
View all