JUUPINE 2025 New Upgraded GECO Plate for Bambu Lab A1 Mini 3D Printer,PLA Cold Plate (No Heating) 184X184mm Magnetic Spring Steel 0℃ Printing Hot Bed No Glue Required. - size: 184x184mm (for A1 Mini)

About this item

• No Heat Required:​Specially manufactured for PLA,no need to wait for heating up the hot bed.Just set the hot bed to 1°C,with less power,it can save you more energy and reduce printing costs.The GECO Plate is also the first choice for farmers to print,stable printing, energy saving and reduce spaghetti.Note:Only PLA can be printed.
• Reusable,Perfect Adhesion:It has excellent adhesion without heating the platform,The model can be firmly attached to the GECO surface,Even beginners can print easily.Long term printing can still maintain 100% perfect adhesion,say goodbye to glue and spray, make every printing process smooth and effortless.
• Note:Our "no heating" is the result of testing at room temperature of about 20℃. If your room temperature is very low, please increase the temperature to 20-40℃. If the object you print is a batch of mini object or a large object, it is recommended to add a brim or increase the temperature.
• Thicker and heavier:Our GECO plate for bambu lab A1 Mini 3d printer is thicker and heavier than the regular PEI build plate. Thick and magnetic can make large prints do not warp, small and tall prints do not fall.​
• Easy to Remove Models:High quality spring steel is the main supporting structure,most of the time, you can easily get the model out without bending or any tools, if it's stuck, you can bend the GECO plate slightly, take the model, and then it will return to being flat.
• Simple Daily Maintenance:Before printing, you can clean the GECO plate by wiping it with alcohol or using soapy water to remove dust, oil, and fingerprints, and then Select "Textured PEl Plate" and set temperature to plate.
• Maintain Build Plate:After long-term repeated use, the plate needs to be repaired and cleaned. Maintain the print platform: After long-term repeated use, the print build plate needs maintenance and cleaning. After cleaning, set the hot bed to 55℃ to heat the build plate, which will restore the adhesion of the build plate to its original state. (No printing is required during the maintenance process)
• Cpmpatible Printer:It is suitable for Bambu Lab A1 Mini 3D Printer.GECO plate has a beautiful surface texture and a full sci-fi style.The print will not transfer the surface texture,which can keep the bottom ofyour print delicate and uniform with coordinated texture.
• Stable endurance, long-term use:GECO stabilizing coating is very durable and maintains stable adhesion evenafter long-term use. lt extends the service life of the printing plate and reducesthe cost of 3D printing.which is more low-carbon and environmentally friendly.After 400+ prints, the adhesion of the GECO printing plate is still about 80%.