Electric Hot Wire Cutter 5CM length Hot melt Pen, Hot Electric Cutter Kit, Styrofoam Hot Hot Wire Cutting Pen for Amateur DIY Heat Cutting Engraving Art Making handmade - size: 50mm

About this item

• MULTIFUNCTIONAL STYROFOAM CUTTING HOT PEN:electric foam cutting machine pen 5CM with adaptor,It can cut and carve foam board, kt board, pearl cotton, chemical fabric and other melting materials.ideal for low density styrofoam,Hot Wire Pen is art model making,students handmade practise,advertising words making,creative modela very suitable tool. The hot wire cutter kit includes, a hot wre pen a 12V adapter, a metal holder, and a manual.
• ELECTRIC HOT WIRE CUTTER PEN IS EFFICIENT SAFE AND CONVENIENT:hot wire foam cutting pen can cut the foam quickly and smoothly,sealing the edges without leaving any debris!You can cut the template or foam block from any angle and then process it into the desired shape.
• HEAT CUTTING ENGRAVING PEN HEATING FAST HIGH POWER LONG LIFE:easy to use,plug the cutting pen into the power socket,and then turn on the switch on the handle to start working.after the hot wire cutter is powered on, it can heat up quickly and the temperature is very high after 10 seconds,styrofoam cutter hot wire can be used to cut engrave the foam from any starting pionts.
• ELECTRIC STYROFOAM CUTTING TOOL KIT COMES WITH A METAL BRACKET BRACKET:When you want to take a break, you can put the cutting pen on the bracket,prevent burning of objects and risk of injury. In addition, the anti-slip of the handle is also very good, you don't have to worry about slipping out of your hands while working.
• 1.Before using the cutting pen, please check whether the power is connected, the power connection is secure, the power switch is turned on, and the DC connector is fully inserted. Otherwise, the cutting pen will not heat up properly. 2.After power is connected, the tip of the heating rod does not heat up—instead, the heating rod near the pen head generates heat. Do not touch the metal parts of the pen body with your hands to avoid scalding! 3. The cutting pen should not work continuously for more than 30 minutes. After more than 30 minutes, it is best to turn off the power for 5 minutes before use.
• 1.When cutting, wait until it melts before moving the pen. Do not use too much pressure to cut, as the pen tip may break. 2.When bending, do not directly bend the right angle as it may break or short-circuit the circuit inside. It should be bent with a rounded corner greater than R5MM and can only be bent once. Bending back and forth will break the pen tip. 3.When using a cutting pen, do not operate it vertically, as the heat from the pen tip will form a chimney effect and the heat will rise vertically, causing the handle to melt. It is best to have a certain tilt.
• 1.When cutting foam, feed the blade while melting the foam, maintain a constant speed, and avoid applying force. This way, the cut surface will be neat and smooth. 2.It can cut and carve foam rubber sheets, KT boards, EPE foam, chemical fabrics and other hot-melt materials, and is suitable for low-density polystyrene foam plastics.
• It cannot cut cardboard, paper, plastic boards, PU boards, sponges, rubber and plastic insulation boards, and other materials with high density and high melting points. Materials with a paper film are not allowed to be cut to avoid igniting the paper and causing a fire. Cutting foam boards with high density and high melting points is not recommended, as the efficiency may be very low. When you encounter any problems in use, please contact us in time, If it is our product quality accident, we will give the refund guarantee as soon as possible.

Overview

• Material: Metal
• Brand: FIRElood
• Color: Blue
• Item Length: 50 millimeters
• Handle Material: Metal
• Blade Material: Stainless Steel
• Style: Electric Cutter
• Unit Count: 1 Count
• Number of Packs: 1
• Manufacturer: FIRElood