1 9

ANYCUBIC PLA 3D Printer Filament, Glow in the Dark, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool (2.2 lbs), Glow Green - color: 1kg Pla Glow in the Dark - Glow to Green

ANYCUBIC PLA 3D Printer Filament, Glow in the Dark, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Reusable Spool (2.2 lbs), Glow Green - color: 1kg Pla Glow in the Dark - Glow to Green

$39.82 USD
$39.82 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.

About this item

  • 【𝐆𝐥𝐨𝐰 𝐢𝐧 𝐭𝐡𝐞 𝐃𝐚𝐫𝐤】lt contains fluorescent materials that can glow in the dark after absorbing light energy. Compared to similar products on the market, Anycubic Glow-in-the-dark PLA Filament has a brightness increase of 300% and a 150% increase in glow duration under the same lighting conditions. We recommend you to expose the prints to a full of sunlight or UV light for a period of time.
  • 【𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐂𝐨𝐧𝐬𝐢𝐬𝐭𝐞𝐧𝐜𝐲】 Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance +/- 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
  • 【𝐍𝐞𝐚𝐭 𝐒𝐩𝐨𝐨𝐥 & 𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐐𝐮𝐚𝐥𝐢𝐭𝐲】 The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely.
  • 【𝐂𝐥𝐨𝐠-𝐅𝐫𝐞𝐞 & 𝐁𝐮𝐛𝐛𝐥𝐞-𝐅𝐫𝐞𝐞】 Designed and Manufactured with a Clog-Free to ensure a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
  • 【𝐅𝐢𝐥𝐚𝐦𝐞𝐧𝐭 𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧】 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk.

Overview

  • Brand: ANYCUBIC
  • Material: Polylactic Acid
  • Color: 1kg Pla Glow in the Dark - Glow to Green
  • Item Weight: 1 kg
  • Item Diameter: 1.75 millimeters

Low stock: 10 left

View full details

Reviews

  • ⭐⭐⭐⭐⭐

    Hannah Miller — Seattle, Washington
    I ordered several science activity supplies for projects at home. The product descriptions made it easier to compare the available options, and everything fit neatly into our learning space. Stemora made finding tools for hands-on activities feel simple and organized.

  • ⭐⭐⭐⭐⭐

    Daniel Foster — Austin, Texas
    I found a useful selection of electronics and robotics accessories for a beginner project. It was convenient to browse related components in clearly organized categories. I would consider shopping here again when planning another maker activity.

  • ⭐⭐⭐⭐⭐

    Lauren Bennett — Denver, Colorado
    The measurement and observation tools I selected worked well for the classroom activities I had planned. I especially appreciated being able to review the product details before ordering and choose items that matched the lesson requirements.

  • ⭐⭐⭐⭐⭐

    Jason Parker — Portland, Oregon
    I purchased a few storage items and small tools for organizing my maker workspace. The products helped keep components, wires, and project materials easier to sort and access. The overall shopping experience was straightforward and convenient.

New Arrivals

View all

FAQ

What types of products does Stemora offer?


Stemora offers supplies for science experiments, microscopy, biology learning, measurement, laboratory organization, electronics, robotics, coding education, 3D printing, maker projects, and classroom activities. Available products and specifications may change over time.

Are Stemora products suitable for children?


Recommended ages vary by product. Please review the product description, manufacturer guidance, included warnings, and required skill level before purchasing. Products containing small parts, tools, electrical components, glass, or chemicals may not be suitable for young children.

Is adult supervision required?


Adult supervision is recommended for children and students, especially when using electrical components, sharp tools, heated equipment, glassware, small parts, or experiment materials. Customers are responsible for following all product instructions and safety precautions.

Can these products be used at home and in classrooms?


Many products may be suitable for classrooms, home learning, science projects, maker spaces, and hobby activities. Suitability depends on the specific product, learning environment, user experience, and intended activity.

How can I check what is included with a product?


Please review the product title, description, specifications, images, package quantity, and included-components section before ordering. Items shown for demonstration or scale in product images may not always be included.

How do I know whether an electronic or robotics part is compatible?


Check the listed dimensions, voltage, connector type, board compatibility, operating requirements, and supported platforms. Compatibility is not guaranteed unless it is specifically stated on the product page. Contact us before ordering if you need clarification.

When will I receive tracking information?


Tracking information is generally provided within 3–5 business days after an order is confirmed. In some cases, processing may take approximately 7–8 business days. Delivery may require an additional 4–5 business days after tracking becomes available, depending on the carrier and destination.

Why did my order arrive in separate packages?


Products in the same order may be shipped from different fulfillment locations. As a result, items may arrive separately and have different tracking numbers. You will not be charged additional shipping fees solely because an order is divided into multiple packages.

Can I change or cancel my order?


Contact us as soon as possible at vaioamaonaoak@gmail.com. We will try to assist, but changes or cancellations cannot be guaranteed once an order has entered processing or has been shipped.

What should I do if an item arrives damaged, defective, or incorrect?


Contact us promptly at vaioamaonaoak@gmail.com with your order number, a description of the issue, and clear photographs of the item, packaging, and shipping label. Please retain the product and original packaging while we review your request. Eligibility and available resolutions are subject to our Return & Refund Policy.

Blog posts

View all
  • How to Organize Resistors, LEDs, and Tiny Components in a STEM Classroom: A Step-by-Step Guide

    How to Organize Resistors, LEDs, and Tiny Compo...

    Discover how to organize resistors, LEDs, jumper wires, and other small electronics components in a STEM classroom. This practical guide covers storage solutions, labeling systems, project kits, and inventory routines...

    How to Organize Resistors, LEDs, and Tiny Compo...

    Discover how to organize resistors, LEDs, jumper wires, and other small electronics components in a STEM classroom. This practical guide covers storage solutions, labeling systems, project kits, and inventory routines...

  • Arduino Wiring Errors: 7 Mistakes Beginners Make and How to Fix Them

    Arduino Wiring Errors: 7 Mistakes Beginners Mak...

    Troubleshooting Arduino wiring errors becomes easier when you know where to look first. Learn how to identify common breadboard, power, polarity, grounding, and pin-assignment mistakes in beginner electronics projects

    Arduino Wiring Errors: 7 Mistakes Beginners Mak...

    Troubleshooting Arduino wiring errors becomes easier when you know where to look first. Learn how to identify common breadboard, power, polarity, grounding, and pin-assignment mistakes in beginner electronics projects

  • The Beginner’s Wiring Mistakes That Can Quietly Break an Arduino Project

    The Beginner’s Wiring Mistakes That Can Quietly...

    Learn how to troubleshoot common Arduino wiring errors in beginner electronics projects. Discover practical breadboard, LED, sensor, power, and grounding checks that make STEM maker projects easier to debug.

    The Beginner’s Wiring Mistakes That Can Quietly...

    Learn how to troubleshoot common Arduino wiring errors in beginner electronics projects. Discover practical breadboard, LED, sensor, power, and grounding checks that make STEM maker projects easier to debug.

1 3
View all